Another Use for Injured Prints

This post may contain affiliate links. Please read the disclosure for more info.

or How I Made a Mousepad in 5 Minutes

I’ve been threatening to make a new mouse pad for quite a while, but of course my “to do” list gets longer every day and it wasn’t a priority up until the other day when I finally couldn’t stand the sight of my old mouse pad which is all ratty on the ends, is covered in coffee and tea stains and probably breakfast stains as well, and is all together quite uninspirational and virtually unusable. I’ll do you a big favor and not show it to you.

So I finally decided that I could take 15 minutes out of my day to do this small project which also happens to be another perfect project for one of my injured prints. I’ve already shown you a couple of nice projects I’ve done using injured prints … a wallet I use every day and some lovely fabric postcards.

So I dug up another injured print and rather than the 15 minutes it thought it might take to finish the project, it in fact only took about 5 minutes and I have a fabulous new mousepad to show for it! Here’s how I did it …

The first thing you need is an injured print. This was a fairly large print that slipped at the end (of course) during printing and you can see that the colors went a little screwy on the right hand side. However the rest of the print was fine and almost just the right size for a mouse pad. I painted a sealer over the top of the print so it gave it a slightly rough surface and this will also protect from spills.

Inkjet Printing on Fabric

You also need some thick stabilizer like timtex or peltex, fusible on one side …

Inkjet Printing on Fabric

… and some grip matting …

Inkjet Printing on Fabric

I wanted a finished size of 8″ x 9″ so I cut each piece slightly oversize, then fused the print to the stabilizer, cut it to size, and zigzag stitched around the edges.

Inkjet Printing on Fabric

I was then going to fuse the grip matting to the back of the peltex however it didn’t fuse too well so I ended up gluing it on which worked perfectly. The grip mat is the perfect thing to hold the mousepad in place and stop it from slipping all over the place.

Inkjet Printing on Fabric

Then I carefully trimmed away the excess matting from around the edges being careful not to cut the stitching. And …. ta! da! one fabulous mouse pad whipped up in no time at all and much better looking than my old mouse pad!

Inkjet Printing on Fabric

And don’t forget .. my favorite method of making fabulous prints (injured or not) is using digital grounds – you’ll find LOTS of info here.





7 thoughts on “Another Use for Injured Prints”

  1. Hi Linda, This is great! I’ve got lots of injured prints to use for this project. Just wondering what kind of sealer you used that works well with the mouse. Thanks! Heidi

    1. Hi Heidi, I use the Golden uvls topcoat for digital grounds – you can see it here in the resource section
      http://www.creative-cloth.com/resources/
      It not only preserves and protects the printed image, but when you paint it on it also leaves very subtle striations on the surface. Two coats painted on, the first coat vertical, the second horizontal, provides just enough texture for the mouse. It works brilliantly and I think I’m going to make some of these mousepads for Christmas gifts this year 🙂
      Linda

  2. Soooo, how does it work and can we see a profile of the thickness? This is really lovely and I don’t know why anyone wouldn’t want them for a gift!

Comments are closed.

shares